220
5. MY DESTINATIONS
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
LOADING POIs AND ROUTES VIA A
USB MEMORY
1 Open the cover and connect a USB
memory.
Type A
Type B
2 Display the “Navigation” menu screen
and select “Enter destination”.
(P.176)
3 Select the “Advanced” tab.
4 Select “Load POIs and routes from
USB”.
5 Check that a progress bar is being dis-
played while the data loading is in
progress.
To cancel this function, select “Cancel”.
6 Check that a confirmation screen is
displayed when the operation is com-
plete.
7 Check that the entry is registered in the
“Stored” list on the “My destinations”
screen. (P.216)
REGISTERING FROM AN
EXTERNAL DEVICE
“vCards” formatted data can be trans-
ferred from a USB memory to this sys-
tem. Transferred POIs and routes will
be stored in the “Stored” list on the “My
destinations” screen. (P.216)
To Next Page
Loading...
