Toyota Vitz - To Park

2-1. How to drive
■To park
Automatic car
Keep the shift lever at D and step on the brake pedal.
Set the shift lever to P (P. 133)
If you park in the middle of a slope, chock if necessary*Please use.
*Wheel chocks can be purchased at Toyota dealers.
2
Apply the parking brake (P. 141)
Vehicles without smart entry & start system: Set the
engine switch to "LOCK" to stop the engine
luck
Turn
vinegar
NS
When
tree
NS
Vehicles equipped with smart entry & start system:
Turn off the “engine start / stop” switch to stop the engine.
Make sure you carry the key and lock the door
Manual car
While pressing the clutch pedal, step on the brake pedal
Set the shift lever to N (P. 139)
When parking in the middle of a slope, set the shift lever to 1st speed or R as
necessary, and chock the wheel.*Please use.
*Wheel chocks can be purchased at Toyota dealers.
Apply the parking brake (P. 141)
Vehicles without smart entry & start system
Set the engine switch to “LOCK” to stop the engine
Vehicles equipped with smart entry & start system
Turn off the “engine start / stop” switch to stop the engine.
Make sure you carry the key and lock the door
111