2-1. How to drive
Direction indicator lever
By operating the lever, the driver's intention can be displayed as follows.
Turn left
Turn right
Change lane to the left
(Hold the lever in the middle)
Turn left direction until you release the lever
The light will blink.
Change lane to the right
(Hold the lever in the middle)
Turn right direction until you release the lever
The light will blink.
knowledge
■Operating conditions
Vehicles without smart entry & start system
When the engine switch is "ON"
Vehicles equipped with smart entry & start system
When the "engine start / stop" switch is in ignition ON mode
■When the indicator light blinks abnormally fast
Make sure that the light bulb of the turn signal is not burnt out.
140
To Next Page
Loading...
