5-2. Emergency measures
Tire installation
Wheel contact surfaces, bolts and nuts
Threaded part, tapered part of nut
Remove any dirt or foreign matter
If the wheel contact surface is dirty, it will run
The nut loosens inside and the tire comes off
There is a risk of
Install the tires and manually tighten the nuts until the tires do not rattle.
Temporarily tighten
Vehicles with steel wheels
Tapered part
Emergency tie from steel wheel
When changing to a frog, the nut tape
The par part is light on the seat part of the wheel
Turn until it hits
Seat part
Vehicles with aluminum wheels
Tapered part
Emergency tires from aluminum wheels
When changing to, the nut tape
The par part is light on the seat part of the wheel
Turn until it hits
Seat part
322
To Next Page
