Toyota Vitz - How to Start the Engine; Switching the Position of the Engine Switch; Engine (Ignition) Switch (Smart Entry & Start Vehicles Without System)

2-1. How to drive
Engine (ignition) switch (vehicles without smart entry & start system)
■How to start the engine
Automatic car
Make sure the parking brake is applied
Make sure the shift lever is in the P position
Sit in the driver's seat and step on the brake pedal firmly
Turn the engine switch to the "START" position
Manual car
Adjust the seat position so that you can take the correct driving posture
(P. 80), and check each pedal position.
Make sure the parking brake is applied Make sure
the shift lever is in the N position
Firmly step on the clutch pedal and brake pedal
Turn the engine switch to the "START" position
■Switching the position of the engine switch
“LOCK” (OFF)
･Steering lock is applied
increase.
･You can insert and remove the key
to come.
(Automatic cars shift
When the lever position is P,Key
Can be inserted and removed)
“ACC”
With electrical equipment such as audio
to come.
“ON”
All electrical components can be used.
“START”
The engine can be started.
122