2-2. How to read the meter
* *
Smart entry & su
Tart system indicator light
Shift position indicator light
(P. 133)
(Green) (P. 125)
*
Shift position shift
Range indicator (P. 136)
* 1 Turn the engine switch "ON" to check the operation (smart entry)
& Turns on when the start system is not installed (vehicles without the start system)
or when the "engine start / stop" switch is set to the ignition ON mode (vehicles with
the smart entry & start system), and turns off after a few seconds or when the engine
is started. If it does not light up or remains lit, there is a risk of system malfunction.
Have your car checked at a Toyota dealer.
* 2 Lights when the engine cooling water temperature is low.
* : Different equipment and optional equipment depending on the vehicle model, etc.
148
To Next Page
Loading...
