TP-Link Archer C55 - Page 49

Archer C55
AC1200 Wireless Dual Band Gigabit Router
- 44 -
the following figure.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
 MAC Address - The wireless station's MAC address that you want to filter.
 Status - The status of this entry, either Enabled or Disabled.
 Host - The host network for the filtering rules.
 Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in the following figure:
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX:XX:XX:XX:XX:XX (X is any hexadecimal digit). For example:
00:0A:EB:B0:00:0B.
2. Give a simple description for the wireless station in the Description field. For example:
Wireless station A.