- 61 -
4.8 Guest Network
Choose “Guest Network”, and you can configure the Guest Network Wireless Settings on the
page as shown in the following figure.
Allow Guest To Access My Local Network - If enabled, guests can communicate with
hosts.
Guest Network Isolation -. If enabled, guests are isolated from each other.
Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules
will take effect.
Band Select/Guest Network – Select the wireless network band (2.4G/5G) and enabled or
disable its Guest Network function.
Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
To Next Page
Loading...
