62
Chapter 13
Specify Your Network Settings
3. Click Start WPS on the page.
4. Press the WPS button of the client device directly.
5. The router’s LED flashes quickly for about 2 minutes during the WPS process.
6. When the LED is on, the client device has successfully connected to the modem
router.
Method 3: Enter the modem router’s PIN on your client device
Use this method if your client device asks for the modem router’s PIN.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced > Wireless > WPS page. Click Method Two--PIN.
3. Take a note of the Current PIN of the modem router. You can also click the Generate
button to get a new PIN.
4. On the client device, enter the modem router’s PIN. (The default PIN is also printed
on the label of the modem router.)
5. The router’s LED flashes quickly for about two minutes during the WPS process.
6. When the LED is on, the client device has successfully connected to the modem
router.
Note:
The WPS function cannot be configured if the wireless function of the modem router is disabled. Please make sure the
wireless function is enabled before configuring WPS.
Method 4: Enter the client device’s PIN on the modem router
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
To Next Page
Loading...
