LED Explanation
Name Status
Indication
Power
On System initialization complete.
Flashing
System initializing or firmware upgrading is in process. Do not
disconnect or power off the modem router.
Off
Power is off. Please ensure that the power adapter is
connected correctly.
VDSL/ADSL
On DSL line is synchronized and ready to use.
Flashing The DSL negotiation is in progress.
Off
DSL synchronization failed. Please refer to Note 1 for
troubleshooting.
Internet
On The network is available with a successful Internet connection.
Off
There is no successful Internet connection or the modem
router is operating in Bridge mode. Please refer to Note 2 for
troubleshooting.
Wireless 2.4Ghz
On The wireless 2.4GHz band is working properly.
Quick
Flashing
WPS handshaking is in process and will continue for about
2 minutes. Please press the WPS button on other wireless
devices that you want to add to the network while the LED
is flashing.
Off The wireless 2.4 GHz band is disabled.
Wireless 5Ghz
On The wireless 5GHz band is working properly.
Quick
Flashing
WPS handshaking is in process and will continue for about
2 minutes. Please press the WPS button on other wireless
devices that you want to add to the network while the LED
is flashing.
Off The wireless 5GHz band is disabled.
LAN
On At least one LAN port is connected.
Off No LAN port is connected.
USB
On The USB device is identified and ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
Phone
On The phone is off-hook or cordless phone is busy.
Flashing The phone is ringing or cordless phone is registering.
Off The phone is on-hook.
To Next Page
Loading...
