30
Chapter 5
Telephony
DECT Handsets would be in Eco Mode and do not emit any signal. It will wake up
automatically when there is a call.
7. Security: Check the box if you want the DECT/CAT-iq encrypt security to take effect.
It is enabled by default.
8. Click Save to make the settings effective.
5. 3. Entering Telephone Information
Before using telephony services, you should first enter your telephone information
provided by your telephony service provider.
Follow the steps below to enter information:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > VoIP > Telephone Numbers to open the configuration page.
3. Click Add and you will see the following screen.
To Next Page
Loading...
