EasyManua.ls Logo

TP-Link archer VR900V - Page 28

TP-Link archer VR900V
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Chapter 5
Telephony
1. Open the operation menu of your DECT handset, and start registering at a base
station.
2. Press and hold the DECT button on the side panel of the modem router until its
Phone LED ( ) starts flashing.
3. Enter the PIN code on your DECT handset if required. The default PIN is 0000.
4. Please finish the registration process in one minute. When registered successfully,
your DECT handset will give a completion sign.
Notes:
1. Up to six DECT handsets can be registered on the modem router.
2. If you press the DECT button for more than 4 seconds, and the Phone LED still does not light, release the button
and try again.
Method 2: Via Web Management Interface
Follow the steps below to register:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced > VoIP > Telephony Devices to open the registration page.

Table of Contents

Related product manuals