45
Chapter 5
Telephony
1. Plug the USB storage device into the USB slot on the modem
router.
2. Visit http://tplinkmodem.net, and log in with the password
you set for the router.
3. Go to Advanced > VoIP > USB Voice Mail.
4. Click USB Voice Mail to enable this function.
5. Set the “No answer“ Time. A time period. If the call is not
answered within this time period, the caller can leave a voice
mail.
6. Choose greetings for your Voice Mail. You can record the
greeting by dialing *30 on the keyboard of your telephone.
7. Remote Access PIN: The PIN needed for listening to your
voice mails remotely.
8. Set how long a voice mail can last at Voice Mail Duration.
9. Click Save to make the settings effective.
When a voice mail is recorded, the modem router will display it
in the following table.
How can I
do that?
Done!
To Next Page
Loading...
