40
Chapter 7
QoS
¾ To add a flow classification:
1 ) Locate the Flow Classification section, and click Add.
2 ) Type a name for the data flow in the Class Name field. Every flow class must
have a unique name.
3 ) Select the Order for the data flow, each packet can match only one flow
classification. The matching is started from the lower order to higher order.
4 ) Specify other settings according to the explanation below.
• Ingress Interface: Select the interface you want to control. 2.4GHz and 5GHz
wireless networks are regarded as the ingress interface respectively.
• Ether Type: Select the ether type and specify the related settings you want to
control. Deferent Ether Type may relate to different settings. It is optional.
• Source MAC Address: Specify the source MAC address you want to control. It
is optional.
• Direction: Displays the data flow direction depending on the ingress interface
you selected.
To Next Page
Loading...
