Choose the menu Network Security→IP-MAC Binding→Binding Table to load the following
page.
Figure 11-8 DHCP Snooping
Note:
If you want to enable the DHCP Snooping feature for the member port of LAG, please ensure the
parameters of all the member ports are the same.
The following entries are displayed on this screen:
¾ DHCP Snooping Config
DHCP Snooping: Enable/Disable the DHCP Snooping function globally.
Global Flow Control: Select the value to specify the maximum amount of DHCP
145
To Next Page
Loading...
