Configuration Guide 108
Configuring LAG LAG
1
LAG
1.1 Overview
With LAG (Link Aggregation Group) function, you can aggregate multiple physical ports into
a logical interface to increase link bandwidth and configure the backup ports to enhance
the connection reliability.
1.2 Supported Features
You can configure LAG in two ways: static LAG and LACP (Link Aggregation Control
Protocol).
Static LAG
The member ports are manually added to the LAG.
LACP
The switch uses LACP to implement dynamic link aggregation and disaggregation
by exchanging LACP packets with its partner. LACP extends the flexibility of the LAG
configuration.
To Next Page
Loading...
