TP-Link T1600G Series - Configuring Static Router Port

Configuring Layer 2 Multicast IGMP Snooping Configurations
Configuration Guide
293
Member Time:400
Static Router Port:None
Dynamic Router Port:None
Forbidden Router Port:None
Switch(config)#end
Switch#copy running-config startup-config
Configuring Static Router Port
Step 1 configure
Enter global configuration mode.
Step 2 ip igmp snooping vlan-config
vlan-id-list
[rport interface {gigabitEthernet
port-list
| port-
channel
port-channel-id
}]
port-list
and
port-channel-id
are the static router ports in the specified VLAN.
Step 3 show ip igmp snooping vlan
vlan-id
Show the basic IGMP snooping configuration in the specified VLAN.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable IGMP Snooping in VLAN 2 and configure port
1/0/2 as the static router port:
Switch#configure
Switch(config)#ip igmp snooping
Switch(config)#ip igmp snooping vlan-config 2 rport interface gigabitEthernet 1/0/2
Switch(config)#show ip igmp snooping vlan 2
Vlan Id: 2
Router Time:0
Member Time:0
Static Router Port:Gi1/0/2
Dynamic Router Port:None
Forbidden Router Port:None
Switch(config)#end