TP-Link T1600G Series - STP Security Configurations; Using the GUI; Configuring the STP Security

Configuration Guide 238
Configuring Spanning Tree STP Security Configurations
4
STP Security Configurations
With STP security, you can:

Configure the Loop Protect function.

Configure the Root Protect function.

Configure the TC Protect function.

Configure the BPDU Protect function.

Configure the BPDU Filter function.
4.1 Using the GUI
4.1.1 Configuring the STP Security
Choose the menu Spanning Tree > STP Security > Port Protect to load the following
page.
Figure 4-1 Configuring the Port Protect