TP-Link TD-W8901G - Q1. How Do I Restore My Modem Routers Configuration to Its Factory Default Settings; Q2. What Can I Do if I Dont Know or Forgot My Password; Q3. Why Cant I Open some Websites Like Www.msn.com or It Opens very Slowly

9 / 15
Note
Appendix - FAQ
Q1. How do I restore my modem’s configuration to its factory default settings?
Q2. What can I do if I don’t know or forgot my password?
1) Restore the Router’s configuration to its factory default settings. If you don’t know how to do that,
please refer to section Q1.
2) Use the default user name and password: admin, admin.
Q3. Why can’t I open some websites like www.msn.com or it opens very slowly?
Some website or routers requires lower MTU size, please change the default 1480 bytes to lower and
try again.
1) Login to the Web-based configuration page and go to Interface Setup – Internet;
2) Locate the TCP MTU Option and change the default MTU size to 1440 or lower.
Once the Router is reset, the current configuration settings will be lost and you will need to
re-configure the router.
With the Router powered on,
press and hold the Reset button
on the rear panel for 8 to 10
seconds before releasing it.
Press it for 8 to 10 seconds