TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
2)
Use the Factory Default RESET button: With the router powered on, use a pin to press and
hold the RESET button for at least 5 seconds. And the router will reboot to its factory default
settings.
WPS: The switch for the WPS function. For details, please refer to 4.6.2.1 WPS Setup
.
ON/OFF: The switch for the power.
POWER: The Power plug is where you will connect the power adapter.
Wireless Antenna: To receive and transmit the wireless data.
6
To Next Page
Loading...
