TP-Link TD-W8950N - Advanced

TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-96
 Enabled (Scan): Select this option to enables wireless bridge restriction, and it will scan
the environment for APs that exist around the device. Only those selected AP will be
granted access.
 Refresh: Click this button to scan and display the APs.
Figure 4-97

Note:
Only Open or Shared authentication method support wireless bridge, you should choose
“Wireless”“Security” to change authentication method to “open” or ”shared” mode first.
4.6.6 Advanced
Choose “Wireless””Advanced”, you will see the screen of Wireless--Advanced settings shown
as below.
83