TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-43
Click the Add button Figure 4-43, and you can configure the Q
oS on the next screen.
Figure 4-44
After you specify the condition, click Apply/Save to save the entry.
4.4.9 Bandwidth Control
Choose “Advanced Setup”“Bandwidth Control” and then you will see the screen as shown in
Figure 4-45. This page allows you to enable this function and to config
ure the value of Total
Upstream/Downstream Bandwidth.
45
To Next Page
Loading...
