TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 3-5
3. Choose the WAN Type for Internet access, and then click Next.
Figure 3-6
Note:
1) The Quick Setup Wizard will guide you to configure the WAN Service over ATM interface.
2) If you are unwilling to configure WAN Service now, you can click the Skip WAN button. Then
you can configure WAN service referring to 4.4.1 Layer2 Interface
.
4. If ADSL WAN is choosen, please select your Country and ISP from the drop-down list. Select
WAN Link Type provided by your ISP and enter the related parameters, and then click Next.
Here we use PPPoE as an example.
12
To Next Page
Loading...
