TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-9
4. Enter the following parameters and then click Next.
Figure 4-10
PPP Username/Password: Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
PPPoE Service Name: Enter the Service Name if it was provided by your ISP. If you leave it
blank, the default name will be the same as the Service Description on the previous screen.
Authentication Method: Select the Authentication Method from the drop-down list, the
default method is AUTO, and you can leave it as a default setting.
21
To Next Page
Loading...
