TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
4.4.4.2 IPv6 LAN Config
Choose “Ad
vanced Setup”“LAN” “IPv6 LAN Config”, and you will see the LAN screen
(shown in Figure 4-23), here you can configure LAN IPv6 interface for your
modem router.
Figure 4-23
Interface Address (prefix length is required): Here enter the prefix length of your interface
address.
IPv6 LAN Applications: Select a type to assign IPv6 addresses to the computers in your
LAN. DHCPv6 Server and RADVD are provided.
For DHCPv6 Server:
1) If Stateless is selected, it doesn’t need to be configured.
2) If Stateful is selected, please complete the following parameters.
Start interface ID: Enter a value for the DHCPv6 server to start with when issuing IPv6
addresses.
31
To Next Page
Loading...
