TD-W8950N 150Mbps Wireless N ADSL2+ Modem Router User Guide
Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step
3: Wait for a while until the next screen of adapter appears. Click Finish to complete the
WPS configuration.
Figure 4-72
Method Two:
Step 1: Press the WPS button on the back panel of the router.
Step 2: For the configuration of the wireless adapter, please choose “Push the button on my
access point” in the configuration utility of the WPS as below, and click Next.
65
To Next Page
Loading...
