TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
4.9.1.3 Restore Default
Choose “Management”“Settings”“Re
store Default”, you can see the Restore Default
screen, this screen (shown in Figure 4-120) allows you to restore the route
r’s configuration to the
factory defaults on the screen.
Figure 4-120
Restore Default Settings: Click this button to restore the router’s configuration to the factory
defaults, and then follow the on-screen instructions to complete it.
Account and Password: The default account name and its password are both admin.
The default IP Address: 192.168.1.1.
The default Subnet Mask: 255.255.255.0.
4.9.2 System Log
Choose “Management”“System Log”, you can see the System Log screen, this screen
(shown in Figure 4-121) allows you to view the system log and configure the
system log options.
Figure 4-121
To View the System Log:
Click the View System Log button, you will see the screen (shown in Figure 4-122) which displays
the router’s recent logs.
Figure 4-122
Refresh: Click the button, the information in the table will be updated.
92
To Next Page
Loading...
