TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
4.5.3 Wireless Schedule
Choose menu “Wireless”“Wireless Schedule”, you can configure the Task Schedule as shown
below.
Figure 4-93
Note:
The time you set is the period you need the wireless off.
Before configure the wireless schedule, please set system time first which refer to 4.9.5 Internet
Time, then you can enable or disable Wireless Schedule.
Apply To: Select the day or days you need the wireless off.
Start Time, End Time: You can select all day-24 hours or you may enter the Start Time and
End Time in the corresponding field.
Add: Click this button to add your selected time to the below table.
Click the Clear Schedule button to clear your settings in the table.
Click Save to complete the settings.
4.5.4 MAC Filter
Choose “Wireless””MAC Filter”, you will see the screen of Wireless--MAC Filter settings
shown as below.
75
To Next Page
Loading...
