TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
4.4.17 Multicast
Choose “Advanced Setup”“Multicast”, you can configure the IGMP protocol on the screen.
Figure 4-69
Click Apply/Save to save your settings.
4.5 Wireless
Choose “Wireless”, there are six submenus to configure Wireless LAN settings. Click any of them,
and you will be able to configure the corresponding function. The detailed explanations for each
submenu are provided below.
4.5.1 Basic
Choose “Wireless””Basic”, you will see the screen of Wireless--Basic settings shown as below.
The basic settings for wireless networking are set on this screen.
58
To Next Page
Loading...
