TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
1)
Use the Restore Default function on Management -> settings -> Restore Default page in
the router's Web-based Utility.
2) Use the Factory Default RESET button: With the router powered on, use a pin to press and
hold the RESET button for at least 5 seconds. And the router will reboot to its factory default
settings.
WPS: The switch for the WPS function. For details, please refer to 4.5.2.1 WPS Setup
.
ON/OFF: The switch for the power.
POWER: The Power plug is where you will connect the power adapter.
Wireless Antennas: To receive and transmit the wireless data.
6
To Next Page
Loading...
