TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 3-7
Note:
If your country or ISP is not listed, please select Other. Then you can manually enter the VPI/VCI
values and select WAN Link Type provided by your ISP.
If Ethernet WAN is choosen, please select WAN Link Type provided by your ISP and enter the
related parameters, then click Next. Here we use PPPoE as an example.
Figure 3-8
5. The WLAN function is enabled by default. You can rename your wireless network name and
create your own password in this page. The default wireless name is TP-LINK_XXXXXX, and
12
To Next Page
Loading...
