TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Static IP Lease List: Th
e function allows you to specify a reserved IP address for a PC on the
LAN, that PC will always obtain the assigned IP address each time when it accesses the
DHCP server. Reserved IP addresses should be assigned to servers that require permanent
IP settings. Click the Add Entries button in Figure 4-21, and then you will set the rule in the
screen as below.
Figure 4-22
MAC Address: The MAC address of the computer on the LAN which you want to reserve
an IP.
IP Address: The IP address you want to reserved to the computer.
Configure the second IP Address and Subnet Mask: You can configure the router’s
second IP Address and Subnet Mask for LAN Interface through which you can also access to
the Web-based Utility as the default IP Address and Subnet Mask.
4.4.4.1 IPv6 LAN Config
Choose “Ad
vanced Setup”“LAN” “IPv6 LAN Config”, and you will see the LAN screen
(shown in Figure 4-23), here you can configure LAN IPv6 interface for your
modem router.
Figure 4-23
Interface Address (prefix length is required): Here enter the prefix length of your interface
address.
IPv6 LAN Applications: Select a type to assign IPv6 addresses to the computers in your
LAN. DHCPv6 Server and RADVD are provided.
29
To Next Page
Loading...
