TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-28
2. Select the application from the drop-down list. If the list does not have the application that
you want, select the Custom application radio button, and type the name of the custom
application in the text box.
3. Enter the Trigger Port Start, Trigger Port End, Open Port Start and Open Port End in the
table, and then select the Trigger protocol and Open protocol, TCP, UDP or All.
4. Click Save/Apply to enable the settings and then you will see your settings as shown in
Figure 4-27.
Note:
If you select the application from the drop-down list, the External Port Start, External Port End,
Internal Port Start, Internal Port End and the Protocol will be added in the table automatically.
4.4.5.3 DMZ Host
Choose “Ad
vanced Setup”“NAT”“DMZ Host”, you can set up DMZ Host on the screen
(shown in Figure 4-29).
The DMZ host
feature can make a local host be exposed to the Internet for a special-purpose
service, such as online gaming or video conferencing.
Figure 4-29
To add a new DMZ Host:
34
To Next Page
Loading...
