TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-51
4.4.10.2 Static Route
Choose “Ad
vanced Setup”“Routing”“Static Route”. You can see the Static Route screen,
this screen allows you to configure the static routes (shown in Figure 4-52). A static route is a
pre-
determined path that network information must travel to reach a specific host or network.
Figure 4-52
To add static routing entries:
1. Click the Add button in Figure 4-52, and you will see the screen as shown in Figure 4-53.
Figure 4-53
2. Enter the following data:
IP Version: Select the version of IP.
Destination IP Address/prefix length: The Destination IP Address is the address of the
network or host that you want to assign to a static route.
Interface: Select the Interface name in the text box, or else, the default Use Interface will be
adopted for the Static Route.
46
To Next Page
Loading...
