TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
For single PVC with IPoA, sta
tic IPoE protocol, please select the Use the following Static DNS IP
address checkbox, and enter the primary and /or optional secondary DNS server IP addresses
provided by your ISP.
Here you can also select a configured WAN interface for IPv6 DNS server or enter the static IPv6
DNS server Addresses provided by your ISP.
Click the Save/ Apply button to save the new configuration.
4.4.11.2 Dynamic DNS
Choose “Ad
vanced Setup”“DNS”“Dynamic DNS”, you can see the Dynamic DNS screen,
this screen allows you to configure the Dynamic DNS (shown in Figure 4-57).
The modem
router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you
assign a fixed host and domain name to a dynamic Internet IP Address. The Dynamic DNS service
allows you to alias a dynamic IP address to a static hostname in any of the many domains,
allowing your modem router to be more easily accessed from various locations on the Internet.
Figure 4-57
To add a DDNS entry:
1. Click the Add button (pop-up after Figure 4-57), and then you will set the DDNS in the next
screen (shown in Figure 4-58).
Figure 4-58
2. Select D-DNS provider in the drop-down list.
3. Enter the Hostname of the DNS Server, and select the corresponding Interface for the
DDNS, you can leave it default.
49
To Next Page
Loading...
