TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-81
Figure 4-82
Encryption strength: Select the appropriate level of encryption, 64-bit or 128-bit.
Current Network Key: To indicate which WEP key to use, select a transmission key number.
Network Key 1-4: If you want to manually enter the WEP keys, then enter them in the network
Key 1-4 fields.
Configure WEP Settings
1. Select Shared (good) from the Network Authentication drop-down list. The menu will
change to offer the appropriate settings.
2. Select 64-bit from the WEP Encryption drop-down list.
68
To Next Page
Loading...
