The configuration figure is shown as blow:
Figure 2-12 Switch Configuration
Device description field shows the device model number of the switch that you are managing.
Click the icon
to save the current configurations.
Click the icon
to return to the discovering page.
Note:
The switch you log on to should be in the same subnet with your computer.
2.7 Uninstall the Utility
If you want to remove the Easy Smart Configuration Utility, please take the following steps:
1. On the Windows taskbar, click the Start button, point to All Programs
Easy
Smart Configuration Utility, and then click Uninstall Easy Smart Configuration Utility,
shown as the following figure.
12
To Next Page
Loading...
