TP-Link TL-SG1016DE - 802.1 Q PVID Setting

VLAN Name
：
Give a name to the VLAN for identification.
Untagged Ports
：
Click the port icon to configure the egress rule of the traffic
on this port as untagged. The switch drops the tag header
before sending the packet.
Tagged Ports
：
Click the port icon to configure the egress rule
of the traffic
on this port as tagged. The switch adds the tag header before
sending the packet.
VLAN ID
：
Displays the ID number of VLAN.
VLAN Name
：
Displays the user-defined name of VLAN.
Member Ports
：
Displays the port members in the VLAN.
Tagged Ports
：
Displays the tagged port members in the VLAN.
Untagged Ports:
Displays the untagged port members in the VLAN.
Delete VLAN:
Click Delete to delete the corresponding VLAN.
6.4 802.1Q PVID Setting
PVID (Port Vlan ID) is the default VID of the port. When the switch receives an un-VLAN-tagged
packet, it will add a VLAN tag to the packet according to the PVID of its received port and
forward the packet.
When creating VLANs, the PVID of each port, indicating the default VLAN to which the port
belongs, is an important parameter with the following two purposes:
(1) When the switch receives an un-VLAN-tagged packet, it will add a VLAN tag to the
packet according to the PVID of its received port
(2) PVID determines the default broadcast domain of the port, i.e. when the port receives
UL packets or broadcast packets, the port will broadcast the packets in its default
VLAN.
On this page you can configure PVID of the specified port. By default, the PVID of all ports is 1.
Choose the menu VLAN→802.1Q VLAN PVID Setting to load the following page.
35