7.2 Bandwidth Control
Bandwidth control functions to control the ingress/egress traffic rate on each port via
configuring the available bandwidth of each port. In this way, the network bandwidth can be
reasonably distributed and utilized.
On this page you can configure and view the bandwidth control function information.
Choose the menu QoS→Bandwidth Control to load the following page.
Figure 7-5 Bandwidth Control Setting
The following entries are displayed on this screen:
Bandwidth Control
Select:
ing packets on the port. You
can select a rate from the dropdown list or select "Manual" to set
Ingress rate, the system will automatically select integral
multiple of 64Kbps that closest to the rate you entered as the
To Next Page
Loading...
