TP-Link TL-SG1016DE - 802.1 Q VLAN Configuration

Note:
A VLAN cannot be the subset or superset of other VLANs.
6.3 802.1Q VLAN
On this page you can configure 802.1Q VLAN feature and view the related settings.
Choose the menu VLAN→802.1Q VLAN to load the following page.
Figure 6-5 802.1Q VLAN Configuration
To ensure the normal communication of the factory switch, the default VLAN of all ports is set
to be VLAN1. VLAN 1 cannot be modified or deleted.
The following entries are displayed on this screen:

Global Config
802.1Q VLAN Status
：
Enable or disable 802.1Q VLAN mode.

802.1Q VLAN Setting
VLAN ID
：
Enter the ID number of VLAN. It ranges from 2 to 4094.
34