Choose the menu VLAN→Port Based VLAN to load the following page.
Figure 6-4 Port Based VLAN Configuration
To ensure the normal communication of the factory switch, the default VLAN of all ports is set
to VLAN1. VLAN 1 cannot be deleted.
The following entries are displayed on this screen:
Port Based VLAN
Configuration:
Enable or disable Port Based VLAN mode.
Port Based VLAN Setting
VLAN ID:
Select the ID number of VLAN from the drop-down list.
Ports:
Click the port icon to select the port of the VLAN. It is
s field is selected, it indicates the port
belongs to the current VLAN.
VLAN:
Displays the ID number of VLAN.
Port List:
Displays the port members in the VLAN.
Delete VLAN:
Click Delete to delete the corresponding VLAN.
33
To Next Page
Loading...
