3.6 System Reset
On this page you can reset the switch to the default. All the settings will be cleared after the
switch is reset.
Choose the menu System→System Reset to load the following page.
Figure 3-6 System Reset
Note:
After the system is reset, the switch will be reset to the default and all the settings will be
cleared.
3.7 Firmware Upgrade
The switch system can be upgraded via this management page. To upgrade the system is to
get more functions and better performance. Go to http://www.tp-link.com
to download the
updated firmware.
Choose the menu System→Firmware Upgrade to load the following page.
Figure 3-7 System Upgrade
Note:
1. Don’t interrupt the upgrade.
2. Please select the proper software version matching with your hardware to upgrade.
3. To avoid damage, please don't turn off the device while upgrading.
4. After upgrading, the device will reboot automatically.
5. You are suggested to backup the configuration before upgrading.
Return to CONTENTS
19
To Next Page
Loading...
