Chapter 3 System
The System module is mainly for system configuration of the switch, including seven
submenus: System Info, IP Setting, User Account, Backup and Restore, System Reboot,
System Reset and Firmware Upgrade.
3.1 System Info
On this page you can view the system information and define the device description.
Choose the menu System→System Info to load the following page.
Figure 3-1 System Information
System Info
Device Description: Displays the device model number.
MAC Address: Displays the MAC address of the switch.
IP Address:
Di
splays the system IP address of the switch. The default
system IP is 192.168.0.1 and you can change it appropriate to
your needs.
Subnet Mask: Displays the subnet mask of the switch.
Default Gateway: Displays the default gateway of the switch.
Firmware Version: Displays the installed software version number.
Hardware Version: Displays the installed device hardware version number.
15
To Next Page
Loading...
