TP-Link TL-SG2008 - Show Ip Igmp Snooping Vlan

139
Syntax
show ip igmp snooping interface gigabitEthernet [ port | port-list ]
{ basic-config | filter | packet-stat }
Parameter
port —— The Ethernet port number.
port-list —— The list of Ethernet ports.
basic-config | filter | packet-stat —— The related configuration information
selected to display.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the IGMP filter configuration of all ports:
TL-SG2008# show ip igmp snooping interface gigabitEthernet filter
Display the IGMP basic configuration of port 1/0/2:
TL-SG2008# show ip igmp snooping interface gigabitEthernet 1/0/2
basic-config
Display the IGMP packet statistics of ports 1-4:
TL-SG2008# show ip igmp snooping interface gigabitEthernet 1/0/1-4
packet-stat
show ip igmp snooping vlan
Description
The show ip igmp snooping vlan command is used to display the VLAN
configuration of IGMP snooping.
Syntax
show ip igmp snooping vlan [ vlan-id ]
Parameter
vlan-id ——The VLAN ID selected to display.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the IGMP snooping configuration information of VLAN 2: