TP-Link TL-SG2008 - Reboot; Copy Running-Config Startup-Config

69
Example
Reset the software of the switch:
TL-SG2008# reset
reboot
Description
The reboot command is used to reboot the Switch. To avoid damage, please
don’t turn off the device while rebooting.
Syntax
reboot
Command Mode
Privileged EXEC Mode
Example
Reboot the Switch:
TL-SG2008# reboot
copy running-config startup-config
Description
The copy running-config startup-config command is used to save the current
settings.
Syntax
copy running-config startup-config
Command Mode
Privileged EXEC Mode
Example
Save current settings:
TL-SG2008# copy running-config startup-config