75
Syntax
show system-time dst
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the DST time information of the switch
TL-SG2008# show system-time dst
show system-time ntp
Description
The show system-time ntp command is used to display the NTP mode
configuration information.
Syntax
show system-time ntp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the NTP mode configuration information of the switch:
TL-SG2008# show system-time ntp
show cable-diagnostics interface gigabitEthernet
Description
The show cable-diagnostics interface gigabitEthernet command is used to
display the cable diagnostics of the connected Ethernet Port., which facilitates
you to check the connection status of the cable connected to the switch, locate
and diagnose the trouble spot of the network.
Syntax
show cable-diagnostics interface gigabitEthernet port
Parameter
port —— The number of the port which is selected for Cable test.
To Next Page
Loading...
