TP-Link TL-SG2008 - Show Mac Address-Table Mac-Num; Show Mac Address-Table Mac

58
Syntax
show mac address-table interface gigabitEthernet port
Parameter
port —— The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the address configuration of port 1/0/1:
TL-SG2008(config)# show mac address-table interface gigabitEthernet
1/0/1
show mac address-table mac-num
Description
The show mac address-table mac-num command is used to display the total
amount of MAC address table.
Syntax
show mac address-table mac-num
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the total amount of MAC address table:
TL-SG2008(config)# show mac address-table mac-num
show mac address-table mac
Description
The show mac address-table mac command is used to display the information
of the specified MAC address.
Syntax
show mac address-table mac mac-addr
Parameter
mac-addr ——The specified MAC address.