18
Chapter 3
Customize Your Network
1. Visit http://tplinkap.net, and log in with the password you set for the access point.
2. Go to Wireless > WPS.
3. Follow one of the following three methods to connect your WPS-enabled client to the
access point’s Wi-Fi network.
Method 1: Enter the Access Point’s PIN
1. Keep the WPS Status as Enabled and get the Current PIN of the access point.
2. Enter the access point’s Current PIN on your client device to join the access point’s
Wi-Fi network.
Method 2: Press the WPS Button on Your Client Device
1. Keep the WPS Status as Enabled and click Add Device.
2. Select Press the WPS button of the new device within the next two minutes and click
Connect.
3. Within two minutes, press the WPS button on your client device. A success message
will appear on the WPS page if the client device has been successfully added to the
access point’s network.
To Next Page
Loading...
