300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
- 98 -
Figure 4-97 Statistics
Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click
the Enable button. If disabled, the function of DoS protection in Security settings will be
ineffective.
Packets Statistics Interval - The default value is 10. Select a value between 5 and 60
seconds in the pull-down list. The Packets Statistic interval indicates the time section of the
packets statistic.
Sorted Rules - Here displays sort as desired.
Statistics Table:
IP Address
The IP Address displayed with statistics
Total
Packets
The total amount of packets received and transmitted by the
The total amount of bytes received and transmitted by the router.
Current
Packets
The total amount of packets received and transmitted in the last
Packets Statistic interval seconds.
The total amount of bytes received and transmitted in the last
Packets Statistic interval seconds.
ICMP Tx
The total amount of the ICMP packets transmitted to WAN in the
last Packets Statistic interval seconds.
UDP Tx
The total amount of the UDP packets transmitted to WAN in the
last Packets Statistic interval seconds.
TCP SYN Tx
The total amount of the TCP SYN packets transmitted to WAN in
the last Packets Statistic interval seconds.
Click the Save button to save the Packets Statistic interval value.
Click the Auto-refresh checkbox to refresh automatically.
Click the Refresh button to refresh immediately.
To Next Page
Loading...
