EasyManua.ls Logo

TP-Link TL-WR810N - DHCP Client List; Address Reservation

TP-Link TL-WR810N
283 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR810N
300Mbps Wi-Fi Pocket Router/AP/TV Adapter/Repeater
- 171 -
7.7.2 DHCP Client List
Choose menu DHCP
DHCP Client List, and then you can view the information about the
clients attached to the Router in the screen as shown in Figure 7-13.
Figure 7-13 DHCP Clients List
Client Name - The name of the DHCP client
MAC Address - The MAC address of the DHCP client
Assigned IP - The IP address that the Router has allocated to the DHCP client
Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,
a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.
7.7.3 Address Reservation
Choose menu DHCP
Address Reservation, and then you can view and add a reserved
address for clients via the next screen (shown in Figure 7-14).When you specify a reserved IP
address for a PC on the LAN, that PC will always receive the same IP address each time when it
accesses the DHCP server. Reserved IP addresses should be assigned to the servers that
require permanent IP settings.
Figure 7-14 Address Reservation
MAC Address - The MAC address of the PC for which you want to reserve an IP address.
Reserved IP Address - The IP address reserved for the PC by the Router.
Status - The status of this entry either Enabled or Disabled.

Table of Contents

Other manuals for TP-Link TL-WR810N

Related product manuals